Kustom54 4runner Headlight Install
- 10mm Socket
- Phillips Screwdriver
Step 1: Remove Front Bumper
Remove old headlights
After completely removing headlights, we will need to prep the harness by T-Tapping both driver (yellow) and passenger (blue) blinker wires.
Open the fuse box next to the battery. We will need to remove the EFI-2 fuse and add on the supplied add-a-fuse (attached to harness) with 2x 7.5a fuses.
Before finally securing new headlights, attach all plugs to new assembly and make sure all functions work. Once everything is tested, bolt on the new headlights (see step 2) and enjoy!!
*** If you purchased BILED retrofits there will be a separate harness for the new ballasts. Photos soon.